#the100DayProject Weeks 2 and 3

I’ve joined up with #the100DayProject this year with the goal of spinning every day. Writing down a daily log of my progress is an easy way for me to stay accountable, follow though, and plan what to spin next during this project.

If you’re just joining me, here’s what I did to prep as well as my first week of spinning.

---

Week 2

April 14 (Day 8): Yep, still spinning. In an attempt to make drafting a little easier, I fluffed up the roving by pulling it out to the sides. It’s still all in one piece, but isn’t compacted. Way easier to work with now.

April 15 (Day 9): Had the thought that, if I was working with my wheel, I’d be plying right now instead of still drafting the first single. That’d be in a perfect world though with no interruptions. In this world, past experience has shown that I wouldn’t be spinning at all. I have a new found appreciation for all those women who made a living spinning yarn and knitting garments and keeping the home going while taking care of children.

April 16 (Day 10): Spent most of my spinning time with a lovely section of teal. Well, I like the color. The single kept snapping and pulling apart which I’m not sure was on me or the fiber. Maybe a little bit of both. Today probably takes the cake for the most breaks and joins (not all successful) since Day 1.

April 17 (Day 11): The single on the spindle looks so different from day to day! Even on days where I only get a few minutes to spin, the color and wrap changes so much that it’s like picking up something new to work on. This is not to say that I don’t occasionally get bored and wish the process was going faster. I do. So it’s definitely a good thing I picked fiber with a bit of variety or I’d seriously be thinking about switching things up right now.

April 18 (Day 12): I kept looking at the quickly shortening length of roving and wondering if today would be the day I spun it up. Nope.

April 19 (Day 13): Yay! I finished spinning the first single for the 2-ply this morning. I probably should have paced myself and spun in smaller chunks throughout the day because my shoulder hurts now. Most of today’s spinning was accomplished while sitting cross-legged on the ground which doesn’t leave much height for a lengthening single. So I held my drafting arm way up over my head, and that’s not the most ergonomic of positions. But it’s done. I’m taking a break for the rest of the day. Prepping a leader and removing the spindle can wait until tomorrow.

April 20 (Day 14): I needed that mini break last afternoon and night. My shoulder feels better, but still a little tender. Fine to draft more yarn though.

Pulled the spindle apart and out of the cop, which took more effort than I expected, and finagled the leader out of the center. The cop looks good and is mostly holding together besides from a few fly away strands from the last wraps. I’m hoping it’ll hold up to being a center pull ball during plying...and that the joins will hold up too.

I put the spindle back together and tied a new leader using sock yarn. Then I spun a few yards and only a few yards. The bulk of today’s crafting time went to finishing a last minute baby knit that I need to get in the mail ASAP. Kept the streak going though.

I feel like this would be the time to say something profound about completing another week of #the100DayProject. I got nothing. All I’m doing to making it easy for me to spin in bits and pieces every day without adding too many rules or expectations. It helps that kiddo is my spinning buddy now.

Week 3

April 21 (Day 15): Spent half the time I would have been spinning sewing buttons on a baby sweater. Turned out so cute. I did get a few more yards wound on the spindle in the afternoon.

After spinning the past week on a very full spindle, the last two days have been an adjustment. I have to be way more careful to keep the spindle turning because it doesn’t have enough weight on it to keep spinning as long as it did with an extra ounce or when it gets jostled by a stray toddler foot.

April 22 (Day 16): I got to spin for a few minutes outside today while my spinning buddy dug holes in the dirt. Good times.

April 23 (Day 17): Twist, draft, wind, twist, draft, wind... I am feeling very firmly in the middle of this project. Not the halfway done middle where you have the ending to look forward too. It’s the beginning is over and the end is still a long way off kind of middle. The same could be said for this half spun fiber. If the past few weeks are any indication, I have at least another week of work spinning this single before I can start plying. One day at a time and it’ll get done.

April 24 and 25 (Day 18 and 19): Doing all the things these two days - from grocery shopping to virtual hangouts to lots of cooking - tired me out and didn’t leave much space for spinning. I got a few turns in each day and called it enough. If the single broke, the single broke and I was done.

April 26 (Day 20): Places you can spin - social distancing edition:
1. At the kitchen table while your spinning buddy finishes breakfast.
2. At the kitchen table after lunch to get a quick video.
3. While sitting in the bathroom waiting to assist in grouting tile.
4. Pacing through the living room while your spinning buddy creates sculptures of rubber food.

April 27 (Day 21): Got a few minutes of spinning in today. Just enough to say that I hadn’t skipped a day. It’s going to take me way longer than a week to spin the rest of this single at the rate I’m going now.

#the100DayProject Prep and Week 1

I’ve joined up with #the100DayProject this year with the goal of spinning every day. Writing down a daily log of my progress is an easy way for me to stay accountable, follow though, and plan what I want to do with my next spinning projects during this time.

Last week of March: Decided to do #the100DayProject and committed to daily spinning around the kiddo. Set a few rules for myself to make things easier too.

April 3: Got my spindles off the shelf and picked the Jenkins Turkish Swan to spin on. Also sorted through my more recent fiber purchases and picked out 2 bumps to start with.

April 4: The first half of the fiber is in the bag with the spindle and the other is waiting on the shelf. Ready to go!

I prepped 5 oz of hand dyed Polworth to spin. I couldn’t find any discernible repeat to the colors so I split the roving in half lengthwise. Then I pulled those bumps in half at the midpoint.

The colors are even more varied now that I can see more of the individual fibers. Staple length is around 3” which leaves lots of room for color variation even in that space. So the plan for this fiber is simple: Leave the roving as it is and spin 2 singles for a 2-ply yarn. I’m curious to see if the colors will turn muddy or transcendent.

April 5: I know I’ve picked the right project because I am so excited to start. Waiting eagerly for April 7th over here.

April 6: Put my eager energy into baby gift knitting. So much closer to being finished with that baby sweater.

April 7 (Day 1): Day 1! I was actually somewhat eager to get out of bed because I knew today was the day! I pulled out my spindle and fiber after getting breakfast for kiddo. She was really interested in what I was doing. When I asked her if she like watching me spin, she gave me an enthusiastic “yes!”. That was awesome.

It is very obvious to me that it has been a long time since I’ve spun on a wheel or a spindle. The first hiccup was that I forgot to prep a leader to get started. That sorted, the good news is that my hands still know what to do, but it took me a few yards to find my grove. The spindle kept dropping because I wasn’t letting the spindle spin enough to add the right amount of twist to the single. Might by over twisting now, but we’ll see soon enough. Oh, and kiddo made sure to point out the discarded bits I pulled out to save my sanity. Not helping kid.

I did make one split second decision about this project which was to try to keep the cops pretty as I wind them. Makes the wrapping slow going, but I’m in no rush nor have I really attempted this before. Good thing it’s photogenic.

April 8 (Day 2): Ugh. I’ve hit my first real obstacle in spinning reasonably consistent yarn and enjoying the process: sweaty hands. It’s not even hot outside and my hands are already damp. This makes the fiber gets damp which prevents the roving from drafting smoothly. They get caught on one another and bunch up or pull from farther back in the roving instead of the tips. It’s not enough to felt, but it makes the single lumpy and fuzzy. This problem was easier to deal with when spinning on the wheel because I had a little more leeway to dry my hands. Not sure what the fix is going to be now.

On the upside, kiddo was interested in the spinning again today. She watched me working during her snack (but was was more interested in her cereal). Later, when she wasn’t in her high chair, she came up and gently touched the single as it hung and twisted. So cute!

April 9 (Day 3): Still spinning along. Kiddo’s been way more interested in the spinning today. She made a grab for the fiber so I pulled out a piece from the end for her. It held her attention for all of 3 seconds because the big chunk mom was working with was way more interesting. Later, after I’d finished winding the cop, she wanted to take a closer look. Seemed like she enjoyed it because she laughed and smiled all while poking the yarn and spindle. I had to keep her from scratching at it though. Now if only I could keep her from walking straight into the spindle while I’m spinning.

April 10 (Day 4): Not as much spinning time today, because I had to figure out a comfortable face mask and go grocery shopping. The few minutes I did have sitting in the sun later with my spindle were pretty nice though.

April 11 (Day 5): Finished the first piece of fiber! Now I’m halfway through the first single for this yarn.

April 12 (Day 6): I’ve been giving the kiddo the random bits of pulled out fiber. She’s way more interested in what mom’s doing than what mom’s making.

April 13 (Day 7): One week finished! With 93 days left to go (about 13 weeks), I’m really happy I picked spindle spinning. It’s versatile enough to let me spin when I can in bits and pieces throughout the day, and the kiddo likes watching me spin too. It’s a win for everyone!

Here’s what one week of spinning looks like. It might not look like much now, but it’s going to keep growing.

#the100DayProject 2020

I thought up a few different ideas for 2020’s #the100DayProject. Drawing every day. Learning to play the ukulele. Daily journaling. Consistent pattern design work. Recommitting to my other preexisting daily projects. In the end, I decided to go with the very first idea I had: making yarn everyday.

Spinning has been sorely neglected around here. I spun my most recent skein of yarn in 2018 for Tour de Fleece. I’m writing up the first draft of this post in the lull of cooking cauliflower for dinner and can’t remember if that skein ever made it off the bobbin to set the twist. Ugh. So, April 7th is the day I start spinning again.

But not on my wheel, on my spindles. I need a project for during the day that I can do around the kiddo. I need to be able to pick it up and put it down quickly. It needs to fit in a bag that can go on a shelf out of her reach. So the spindle wins over the wheel. Plus, kiddo needs to see mom doing something that isn’t staring at her phone/screens and that thing should be something mom likes to do.

There was one other big deciding factor as well. There’s not enough time during naps or after she goes to bed for another project. Those hours are full, and I do have to sleep sometime. It’s also a big help that I already have the tools and materials too.

So I’ve picked out my favorite spindle, a 33g Jenkins Turkish Swan, and a few bumps of fiber that have caught my eye. First up is 5 oz of organic Polworth that I picked up at the Handweavers of Boulder Guild Show and Sale last year (I think it was last year). Looks like the second project will be 4 oz of heathered BFL from Greenwood Fiber Arts.

Aside from making yarn everyday, I haven’t attached many constraints to this project. I’m not spinning for a project (at least right now), and I’m not using it clear the stash (though it will). Mostly, I’m just hoping to make spinning a part of my routine again and refresh my muscle memory. As for the posting every day on Instagram part of #the100DayProject, nope. I’m thinking about doing a weekly check in to hold myself accountable and show off my progress. Something simple so that it doesn't feel like a chore.

I took the opportunity on Saturday to prep my fiber and spindle. So I am ready. Are you tackling the project this year? It not too late to join or start, even if it’s way past April 7th when you’re reading this and social distancing is wearing thin.

Knitting At Home Sale

I hope you’re all safe and settled in for social distancing with lots of yarn and fiber to keep you occupied. At first the thought of sending out a newsletter or writing a blog post about knitting seemed odd to me during this tumultuous time. But knitting has power. It can bring warmth and joy, calm and focus, connection and love. I think we can all do with a little bit more of those things.

One of my main goals for With Wool has been to create a sense of connection with fiber arts as the key. I am so thankful that you’re here. One of my other main goals for this space (there are more, but we’ll talk about them later) is to spread joy...and something to occupy your hands and mind with yarn.

All of my knitting patterns are on sale for 40% off through April 4, no coupon necessary.

I also have free patterns for hats, shawls & scarves, fingerless mitts, washcloths, and socks here. So let’s knit, spin, crochet, tat, felt, and make art like introverts - separately, in our own homes.

The amount of time I have for knitting hasn’t changed, but that hasn’t stopped me from planning what to start next. I’ve got a few projects in mind for myself, but gifts and new designs are consuming most of my attention. Hoping to share them with you soon.

How A Challenging Project Changed My Approach To Knit Design and Publishing

I never thought I’d cut my teeth on short row sleeve caps by writing a short row sleeve cap. I always figured that I’d knit one eventually following someone else’s sweater pattern. Okay, let’s back up a little.

A few months ago, a cosplayer friend of mine commissioned me to make the three-legged baby romper from the end of 1991’s Addams Family movie. I loved this movie when it came out and I still regularly watch it. So, of course I was all in when she asked me about knitting it. When I went digging around for a pattern, I found people selling reproductions of the piece, but no patterns. That didn’t frighten me off though. If anything, designing a pattern from something I’ve enjoyed for so long made it a fun challenge. One that’s taken me far longer than expected, but I’m happy with the results. There’s just a bit more of a second sleeve to knit before the whole thing gets a soak and the final finishing touches.

For most of the pattern writing and knitting, the plan was to knit the romper and mail it off. That’d be the end of it. The Bearded One had other ideas, and has been pushing me to release the pattern. I brushed him off in the beginning, but I think I will publish the pattern. Not sure quite when yet, though With Wool Express subscribers will be the first to know.

For as long as I’ve been designing knitting patterns (both free and paid), the question of whether anyone else would knit the pattern was one of the first I’d ask. Designing and writing and laying out a knitting pattern, so that people can understand it is no small amount of work. If I was going to put the effort into publishing a pattern, I didn’t want to put my time towards something that would fall flat or be ignored. I have notebooks filled with ideas that never got beyond a few notes and a half-hearted swatch because I didn’t think anyone else would want to knit them. To be fair, those notebooks are also full of ideas that I fell out of love with along with a few nuggets that keep nagging at me years later.

Now that I have a young kiddo and far less free time than I did when I published my first pattern in 2009, my thoughts have changed. I have far less time to be weighed down by my own self doubt, anxiety, and endless questions. I have to commit what time I do have for deep, focused work to the stuff that I want to do. Even if that thing is a knitting pattern that’s not going to take the world by storm. So, I will be publishing the pattern for this three-legged Addams Family romper and whatever pattern idea consumes my brain next. Solving knitting puzzles with yarn is part of what grounds me and makes me happy, so I’ll continue to knit on and share my patterns. Not all of them will be as geeky as this romper, but they’ll be fun and varied.

FO: Kiddo's New Mittens

Kiddo has a cute blue snowsuit with pink trim and it’s just a bit too long for her which makes outfit extra cute. The arms have little flaps that can be folded over her hands to keep her fingers warm. Know what she hates with a burning tantrum inducing passion? Those flaps because they keep her from driving her fingers straight into the snow. Warm fingers are just not a priority for her. Keeping her fingers warm is, however, a priority for me and the yarn stash.

I made her the Beloved Bonnet by Tin Can Knits last winter. The hat was big at the time - still a bit oversized now - but she likes wearing it. That’s more than I can say for most of her hats that I pick up off the floor 10 seconds after putting them on her noggin. When I went looking for a mitten pattern a few weeks ago, there was just enough yarn left over to make a pair of The World’s Simplest Mittens, also by Tin Can Knits. The pair was an exceedingly quick knit even with the few extra rounds I tacked on to make the mittens longer. There’s still yarn leftover too so who knows what the last 33 yards will turn into.

Normally, this is where I’d show you a cute photo of the matching hat and mittens. I would love to take that photo too, but the hat is currently having an adventure. We don’t know where it is or when it plans to return. I’m hoping soon because there’s 4” of snow on the ground, and kiddo should have her favorite hat back for her adventures. The giant octopus hat is a close second though.

I can show you the mitts in action though! They got their first wearing out to go play in the snow. She didn’t immediately hate them! They got wet, caked in snow, frequently put back on (really need to get some mitten clips), and pulled around in a sled. It was a good day for all involved.

Then, the next day when the mitts were dry again, Kiddo pulled them off the shelf and put one on all by herself. I helped with the second. Yay, knitting win! The first pair of hand knit socks I made for her were also well received and well-worn. I’m trying not to get my hopes up that she’ll love the next thing I make for her too. Optimistic? Sure. Also prepared for kiddo to never want to wear the next thing I knit for her? Yeah, that too.

The Specs:
Pattern: The World’s Simplest Mittens by Tin Can Knits
Yarn: 64 yds Jojoland Splatter Dash - color 36
Needles: US 5 (3.75 mm) and US 6 (4 mm) circular needles
Dates: January 25 - 29, 2020
@Ravelry

Snowy February Sale

January’s weather was cold and clear, but February started off with a snow storm! Hand knits are always a great thing to have whether you’re trudging through the snow or cuddling up inside. So, all With Wool knitting patterns are on sale Feb 6 - 19, 2020.

Use code WARM in the Ravelry shop to get 20% off. Hope you’re staying warm and happy knitting!

FO: Kiddo's Socks

The Kiddo does not like wearing socks. If she has any choice in the matter, she’ll pull them off at her earliest convenience and leave them behind/under the nearest piece of furniture. When we’re short socks on laundry day I go check under the crib with a flashlight. Usually turns up at least a pair or two. This wouldn’t be much of a problem if not for cold toddler toes which should really be warm toddler toes. So I finally decided to knit kiddo a pair of wool socks.

I got started and kept right on knitting with the expectation that I’d be pulling these out from under the furniture just like all her other socks. Then she tried them on and surprised the hell out of me by actually liking them! She didn’t pull them off or chuck them under the coffee table. She wore them, walked around in them, and motioned for me to put them on again the next day. When I asked if she wanted mom to make her more socks, she nodded yes and I was positively verklempt. I hadn’t dared hope that she’d like these socks, but she did, and it felt like my heart was going to burst out of chest from happiness. Kiddo can have all the hand knit socks she wants.

She’s also a natural, if wiggly, sock model.

I made these socks long and oversized, which is probably why she likes them. Her feet have plenty of room to grow, and there’s time enough for me to eventually make another pair. The pattern is one of my own making and it uses lots of ribbing to stretch and fit wiggly growing feet.

While I am very happy with how this pair turned out, the pattern is definitely in need of some tweaks. Good thing I have at least one more pair to knit soon, and plenty of stashed leftover sock yarn to work with. This pair only took about 65 yards (60 m, 14g). Then it’ll be time to figure out how to write it for multiple sizes and lengths in a way that’s clear and easy to follow. It’s going to be awhile before the finished pattern sees the light of day, but that’s okay because it gives me more time to work on getting things right.

New Pattern: The Old Friend Hat

It all started with a hat I knit for the Bearded One nine years ago. He saw a hat he liked on an old British tv show from the 70’s*, and said he would totally wear a hat like that. I, a knitter with a little too much time on her hands, said I could make that happen. After taking a few screen caps, I got to work. The hat wasn’t an exact recreation since I had to guess at some of the details, but it was close and a big success. He wore that hat everywhere and usually kept it in his back pocket just in case he’d need it.

Well, after nine years of constant wear, the hat was an old friend but also showing it’s age. So it was time to knit him another one. While I worked on the new hat, I couldn’t help but imagine a longer slouchier version for me. And how could I not whip up a matching hat for the kiddo too. So I took the opportunity to clean up and expand the pattern to fit small baby heads all the way up to big adult noggins. There’s both a snug fitted version and a long slouchy version. And how could I not name the pattern “Old Friend”. The hat has been with us for 9 years already, and I’ve got the yarn to knit several more. Sounds like this hat is going to be sticking around for a long time.

While I’ve only been wearing my Old Friend hat for a few months, I am absolutely in love. The cables look great with pretty much everything. I wear it slouchy most of the time, but am really glad of the extra ribbing when I want an extra layer over my ears. Even the kiddo, who won’t wear most hats for more than five seconds at a time, wears her Old Friend hat when it’s cold. Though our hats are all different colors and lengths, they still match without having to be exactly the same.

Oh, and after nine years, I am so happy to finally share the pattern with you! Whether you choose to knit it short and fitted or long and slouchy, this cabled hat is sure to become an old friend that’s always by your side.

To celebrate the release of Old Friend, the pattern will be on sale October 13 - 20th, 2019 MST . Use code FRIENDLY when you check out to get 20% off the pattern!

Sizes:

Baby/Toddler: (16 - 18”) [41 - 46 cm]

Child: (18 - 20”) [46 - 51 cm]

Adult S/M: (20 - 22”) [51 - 56 cm]

Adult L: (22 - 24”) [56 - 61 cm]

Gauge: 4 sts and 6 rows = 1” in pattern

Yarn:

For Fitted Hat: 60 (85, 120, 140) yds / 55 [78, 104, 119] m worsted weight yarn

• Shown in Knit Picks Swish Worsted - Allspice, and Stonehedge Fiber Mill Shepherd’s Wool Worsted - Garnet

For Slouchy Hat: 70 (100, 140, 172) yds / 64 [91, 128, 157] m worsted weight yarn

• Shown in Knit Picks Swish Worsted - Dove Heather

Needles and Notions:

• US 7 (4.5mm) 32” circular needles OR 16” circular needles/DPN’s

• Tapestry Needle

• Regular and Locking Stitch Markers (Optional)

*Said show is “Last of the Summer Wine”, and I’m totally guessing that the episodes I was watching were from the 70’s.

How To Knit Cables Without A Cable Needle

I love the complexity and depth and texture that cables create. I love small simple cables and big complicated cables. For complicated cables and reversible cables, cable needles are my best friend, but for small cables - 6 stitches or smaller - I skip the cable needle. It makes the knitting faster and and there’s one less thing to fiddle with.

I knit the Old Friend hat without a cable needle which helped make the project a quick, easy knit.

Front Cross Cable

In the photo above, I’m ready to work a front crossing cable, also called a left cross cable, across the next 4 stitches on the left needle. This means that the 2 right-most stitches will be crossing in front of the 2 left stitches.

The first step is to slip the 2 right (front) stitches closest to the needle tip off the needle.

Next slip the 2 left stitches purl-wise from the left needle to the right needle. The hanging stitches will stay in the front and you can hold them in place with your thumb.

Slip the hanging stitches on to the left needle purl-wise.

Slip the 2 cable stitches on the right needle back to the left needle. Now the hard part is done, and the cable is crossed.

Knit (or purl as the pattern requires) across the cable stitches. You’re ready to keep working across the row.

Here’s what the knitting looks like after working the cable cross.

Back Cross Cable

Now I’m ready to work a back crossing cable, also known as a right cross cable - which means that the 2 right-most stitches will be crossing behind the 2 left stitches. The first step is to slip the 2 right stitches off and hold them behind the needle.

Next slip the 2 left stitches purl-wise from the left needle to the right needle. The hanging stitches will stay in the back which is why you can’t see them in this photo.

Slip the hanging stitches on to the left needle purl-wise.

Slip the cable stitches on the right needle back to the left needle and work across. Now you’re ready to keep knitting to your next cable.

Even Faster Cable Knitting

Now that you’ve seen the basics, are you ready to work cables even faster? Here’s a demo with a front crossing cable, but the basic process will be the same for a back crossing cable as well.

Slip the right needle purl-wise into the left half of the cable stitches from behind.

Pull the left needle out of the cable stitches. The two left stitches will be on the right needle with the other two stitches hanging out in front.

Slip the left needle back into the hanging stitches purl-wise and on the front side of the work. Then slip the 2 cable stitches on the right needle back to the left needle. Work across and you’re ready to cross more cables.

---

If you enjoyed this tutorial, buy me a coffee! Thank you for your support!

Around Here - November 2019

There’s been lots of small great things happening around here. Let’s catch up!

Last weekend, I packed up the family and headed up to the Boulder Handweavers Guild and Sale. It’s always interesting walking around and seeing what all the different fiber artists in the area are getting up too. There were knitted items of all kinds from tiny baby booties to giant shawls. There were beautiful woven clothes, hand dyed silk scarves, felted bowls, as well as yarn and fiber. I also saw some really cool crocheted t-shirt yarn baskets which made me want to give crochet another try.

We spotted a beautiful handwoven rag rug that had to come home with us too. The rug is cushy to stand on, a good size, and has great colors. Said rug is also the first thing we bought for our new place! I’m looking forward to having more room to spread out, and plenty of space for the kiddo to play.

Much progress has been made on kiddo’s Fall sweater. It’s taken a back seat the last few days to other overdue projects, but the sweater has still come a long way in the past week. The yoke is finished, the sleeves are bound off, and now I’m working through the body. It’s been great autopilot knitting to pick up at random moments throughout the day. Still looking for buttons though.

Remember the hat I was trying to make in the likeness of the Trinidad and Tobago flag? I finally figured out how to make the stripes slope in the correct direction! Charting out the rewrites really helped. Now I’m past the spot where I stopped on the first attempt and quickly moving towards the grafting. Who knew I’d be so excited about kitchener stitch.

I decided to take on a project for a friend that sounded so fun I couldn’t resist. That grey and dark grey yarn above? That’s the yarn I’m using, and I don’t think I’ve even been so excited to knit with so much grey. More details on that later.

Sweater Weather

The world outside my windows is covered in falling snow for the third day in a row. All that white stuff is really stacking up so what better thing to do than hunker down inside and cast on for a sweater?

This bright orange number is for the Kiddo and she picked out the color herself when we went to Yarn Fest 2019. The festival was a few months ago, but I can tell she still likes the color because she would not stop staring at it while I knit through breakfast. Maybe the color means she’ll like wearing it more than any of the hats I’ve made her? A mom can dream.

The pattern is In Threes: A Baby Cardigan which has only been in my queue since 2011. I’ve been waiting for the right time to knit it which is apparently right now. The sweater’s simplicity and size make for quick knitting and very noticeable progress. It is also really nice to have something easy to knit during the day when I’m keeping an eye on an inquisitive toddler.

The other reason I started this sweater was because I finally wrote up my Christmas knitting plans. There, I wrote the dreaded words: Christmas knitting. Oh, there they are again. Though, in my case, this end of year dash should probably just be called “Stuff I Want Done Before 2020”. Hmm, not as catchy. There is some holiday knitting on said list, but it’s mostly a bunch of unfinished projects like 70% knit socks or long lingering hats. This sweater made the list because I wanted to knit Kiddo a Fall sweater. Looks like it might be a Winter sweater now though. Guess I better keep knitting.

Shawl Parade

We got an early snow storm last week that dumped about 4” (that’s about 10 cm) and brought cold temps along with it. And I was ready thanks to my very prolific bout of knitting over the summer. All I had to do was wrap myself up in one of the two shawls I finished in August.

The first shawl of the needles was Curve of a Boat by Larissa Brown. It had been a travel project in July, but I didn’t work on it much at all when I was traveling. Turned out to be just what I wanted when I got back home - interesting autopilot knitting that I could relax with at the end of the night.

As beautiful as the shawl was on the needles, washing and blocking really helped it bloom. The yarn plumped and lost the limp feel it had while I was working on it. The garter stitch and mesh sections opened up to make a wonderfully sized shawl with great drape. I love the extra points and different shape that arise from how this shawl is constructed. The only real mod I made was to skip the tassels since I wanted something more streamlined.

The color is definitely more magenta than I usually pick for myself, but it still has earthy tones that will match pretty much all of my jackets. I’ll be wearing Curve so much this Fall.

It took me a few years to join the fade trend, but I finally knit a Free Your Fade shawl. I don’t want to stuff this shawl in a closet when I’m not wearing it. I want to hang it on the wall as art. It’s got beautiful drape and luster, and curls just so. Plus, the colors speak to my usual muted earth tones palette. I haven’t had much luck hanging it up because wall space is at a premium, but it was the perfect thing to wear when I had to run errands through the snow. I can now see why people really love cashmere.

The yarn kit I used added a little extra challenge to the project. While I loved the colors and the fiber blend, every color had the same yardage. So I had to spend a lot more time tracking yardage and “knitting” the shawl in a spreadsheet so I could get the most out of every color. It wasn’t exactly the autopilot knit I imagined but the end result is so worth it.

I had to make a few mods as I went. The biggest is that I started the color/fade sections at different spots in the repeat so I could make the most of the yarn. I also changed the picot bind off to have fewer points. Whenever I knit another one of these shawls, I’ll stick to just a regular yarn over because of the larger stitches sticking out all over the place.

Washing and blocking did wonders for this shawl. The stitches relaxed and I was able to stretch and shape the Fade just so. It went from dense and compact to big and drapey without losing warmth. Perfect for bundling up in the snow.

In typical Fall fashion, the weather is back to it’s sunny, warm, and windy self. The gusts, cold spells, and surprise snow storms are never far off though, and I am so ready.

Pattern: Curve of a Boat by Larissa Brown

Yarn: 429 yds Hedgehog Fibers Socks - Vengeance

Needles: US 4 (3.5 mm)

Dates: June 1 - August 2, 2019

@Ravelry

Pattern: Free Your Fade by Andrea Mowry

Yarn: Sun Valley Fibers MCN Gradient Set

Needles: US 4 (3.5 mm)

Dates: August 5 - 22, 2019

@Ravelry

Sideways Swatching

I don’t always swatch for hats which means I sometimes end up ripping out the first few inches because the hat is comically too big. It’s not a big deal because I know it’s an easy fix to rip out and start over with a few less stitches. The hat I’m knitting this time though is a little different. Instead of working in the round from the bottom up, Cattywampus is worked sideways, on the bias, with short rows. Ripping out because it’s too big or too tall is not an easy task. You better believe I swatched.

The reason for working side-to-side is that I’m making a hat that resembles the flag of Trinidad and Tobago for a friend. I’m not keen on working intarsia, especially intarsia with cotton/linen blends, and working sideways was the easiest way to pull off the diagonal stripes. I worked two sections of the short row crown shaping with all three colors. My gauge was right on the money, and I’m really hoping the swatch wasn’t lying to me.

The other reason I swatched was to see if the colors would bleed. I only have enough yarn to make one hat and it would be really aggravating if the red and black dye bled on the white stripes. After 20+ minutes in a warm soak with Eucalan, the water was still clear without the faintest tint of red. The problem came when I squeezed water out of the swatch. You can just see the the barest pits of pink where the red and white yarn got squished together. Hmmm…

My hope is that if I squeeze out the water in a different way that the colors won’t bleed. Maybe that’s just wishful thinking. Do you have any tips or recommendations for soap that would stop the excess dye in its tracks?

I did start the hat, and worked several repeats. I was almost done with the black stripe that I added after taking this photo. Yarns had been cut and most of the ends woven in. Then I noticed a rather aggravating issue. The short rows slope in the opposite direction of the flag’s diagonal stripes. The only fix is ripping out, reworking the pattern to slope in the opposite direction, and casting on again. Ugh. Looks like I get to restart this hat despite my best efforts.

Celebrating Schacht's 50th Anniversary

The Schacht 50th Anniversary celebration was last Friday, September 20, 2019. There was a full day of events - factory tours, shuttle races, a spin-in, demos, and more - to celebrate the occasion. My wheel is a Schacht Sidekick, and I’ve wanted to see where it was made since I moved to the area. Never got around to taking the tour in the last few years, and I’m happy to have finally gotten the chance.

I was there a few minutes before the next tour ran so I took in the sights. There was Oliver, a personable Corridale/Teeswater sheep, and a whole flock of chickens named after Lord of the Rings characters. This is a naming theme I can stand behind.

The factory was really interesting. Our guide showed us the whole process from start to finish. We saw the CNC routers cutting down blanks to make looms and wheels. There were the jigs used to make pretty much everything. There was even a crash course in how the “wheel” part of wooden spinning wheels are made which was so cool to learn. We saw how the various pieces were sanded and finished with oil before heading off to assembly. I got a little thrill seeing the stacks of cut wood that would become Sidekick wheels.

It was really neat seeing where my wheel was made and the people that made it. As expected the whole place smelled like wood and saw dust which was nice. Though I didn’t expect how loud it would be, not due just to the various machines, but the factory wide vacuum system for controlling sawdust.

I wasn’t able to stick around as long after the tour as I wanted to. The heat and a crushing headache were not a good mix. I was able to find some neat fiber and project bags though. On the left is a fun bump from Hummingbird Moon and the right bump of fiber is the 50th anniversary colorway from Sweet Georgia.

I did pack up my wheel and some fiber for the spin-in, but just wasn’t up for sticking around. Same deal with the Try Out tent. I’ll try my hand at weaving one day. Headache aside, I enjoyed myself and the peek behind the scenes.

Another One for the Red Scarf Project

The Foster Care to Success Red Scarf Project sends red scarves and care packages to college-bound foster youth for Valentine’s Day. They started accepting scarves for Valentine’s Day 2020 September 1st, and this scarf is ready to go. I need to add a label and pick up a gift card to send off with it, but it’s ready.

I’ve knit a few scarves for the project over the years and I’m usually rushing to mail one off right before the submission deadline. Not this time. I’d like to say it’s because I cast on a few months ago, but really it was because I started this scarf way back in 2017. I knit half of the scarf before I needed a break. Then everything else got in the way. It wasn’t until the end of this July that I picked it up again because I needed to knit something so badly. I was digging through my pile of WIPs, found the half-finished scarf, and decided that, obviously, this was the next project to finish. I’m not sure where this sudden and overpowering urge to knit came from but I’m still rolling with it months later. I’ve knit more in these past few months than I have in at least the past year.

The pattern is a mash up of Mabel’s Scarf by Larissa Brown and a band of 2x2 rib. Mabel’s Scarf had been in my queue for awhile, and was the only one that called to me when I was digging through different patterns. The scarf was narrow though and needed the extra stitches to meet the required width. The stitch pattern was based on 2x2 rib so adding more of seemed like the optimum choice relatively easy knitting that still looked good. Once I figured out where I was in the pattern repeat and reclaimed the correct needle tips, the stitches seemed to fly off the needles.

The finished scarf is lovely. It’s beautiful, easy to wrap and tie, and definitely cosy. The chosen yarn, Stonehedge Fiber Mill Shepherd’s Wool Worsted (yeesh, say that 3 times fast), is a wonderful red specked with small bits of blue thanks to how it’s spun. The color has depth and interest and variety even though it just looks red from far off. I’d definitely use this yarn again for another scarf.

Now that I’ve waxed poetic about this scarf, it’s time to put it in the mail to make someone warm and happy.

If you would like to donate money or send a red scarf, you can find more info here. And if you’re looking for a pattern, check out the Melded Scarf which I designed specifically for the Red Scarf Project.

Pattern Specs

Pattern: Mabel’s Scarf by Larissa Brown

Yarn: 413 yds Stonehedge Fiber Mill Shepherd’s Wool Worsted - Garnet

Needles: US 6 (4mm)

Dates: August 28, 2017 - August 15, 2019

@Ravelry

Yarn Along The Rockies 2019

Yarn Along The Rockies was the third week of August, and I happily joined in. I only visited the closest 3 of the 13 shops, but I still enjoyed myself. One of those shops, FingerPlay, was brand new to me and I’ve been meaning to get down there for months. It’s a cute shop with a great vibe, and frequent knit afternoons/open studios. I’m looking forward to stopping in again soon since it’s been so long since I’ve had a regular knitting group to visit. I also made it to Shuttles, Spindles, and Skeins which remains one of my favorite yarn and spinning shops. Maverick Fiber Arts was my other stop and had a nice selection of different yarns and notions.

The stash did get a little larger, but not by much. I have no shortage of sock yarn or spinning fiber, but everything I bought came home with intention. Both sock yarns, Cascade Heritage Wave and Regia Pairfect, made me excited to knit socks for myself again. That’s an exciting feeling after finding it lacking for so long. The fiber, 8 oz of Frabjous Fibers and 4 oz of Hummingbird Moon, will eventually be handspun gifts or play a part in a Nightshift shawl. My plans are still a little murky on that front. I also came home with a pair of sock blockers for the Bearded One’s socks. The blockers are a little shorter than I would like but will still do the job.

While I only visited a fraction of shops on the tour, I enjoyed myself. I got to visit different places, see new yarns, and go on a little adventure. Also picked up a nice project bag which is cool too. I’m glad I didn’t skip the yarn crawl this year, and I’m looking forward to next year.

Marginalia and Spreadsheets

I remember taking a random knitting survey that asked if I preferred printed patterns or digital patterns. I am 100% in for printing my patterns. I’ll keep the file on my phone as a backup, but the paper version is what I’m going to work from. Why? Because it is so much easier to make notes, track repeats, and see the whole pattern at a glance. Plus, I don’t have to run the distraction laden gauntlet that is my phone every time I have a question about a stitch count.

The Free Your Fade pattern, or the Yarn Chicken shawl as I’ve come to call it, is the perfect example. The margins are jam packed with notes. You can see where I’m counting row repeats, tracking how much yarn each section is using, and telling myself where to fade in new colors. All this marginalia is also a pretty handy indicator of how much I’ve knit these past weeks - AKA a lot. This is one case where working from a screen can’t beat paper.

This is not to say that I’m not going to use a computer/phone when needed to enhance my knitting. My spreadsheets and knits are best friends. Take a gander at the screenshot above. Those strings of numbers are me “knitting” the shawl digitally. With enough IRL knitting and then weighing the yarn after each repeat, I was able to determine how much yarn is used per stitch. Armed with that minuscule number, I can work ahead in the spreadsheet, estimate how much yarn will be used, and figure out where to switch colors. There have been some leftovers, but I’m fairly confident I’m getting as much out of the yardage as I can.

Even though this shawl isn’t the low key process knit I was expecting, it’s still really fun. It’s also a great excuse to watch other people play video games I’m not going to play myself. As much as I’ve been focusing on the stitch counts and row by row of this pattern, taking these photos is the first time I laid the shawl out and got a good look at all of it. I really like my Free Your Fade which is, you know, good since I’ve put so much time and energy into it already.

Yarn Chicken Shawl

As a happy birthday gift to myself I finally wound the yarn to knit a Free Your Fade shawl by Andrea Mowry. Dyed by Sun Valley Fibers, the colors are earthy and lovely. The merino/cashmere/nylon blend has been a joy so far. I really enjoyed casting on and knitting the first few repeats during a day trip to Rocky Mountain National Park. However, this shawl is going to be more stressful to knit than I originally thought. Why? I have already played yarn chicken and lost on the first fade!

I was tracking how much yarn I used every repeat (small digital kitchen scales (<<— affiliate link!*) are awesome for this) and estimated I’d have just enough yarn to finish Color 1. I was right except for the 26 stitches left at end of the last row. Bah. It was late so I went to bed instead of ripping back.

Getting some sleep turned out to be the best option because, in the morning, I remembered all the leftover sock yarn I have stashed away. Maybe I could find some that matched? Turns out that I did have something close, and can’t tell the difference between the two in the shawl. The extra ends are the only sign I had to take drastic measures. Whew!

I’m going to rename the shawl Yarn Chicken because, while I have the required amount of yarn, all six colors are the same yardage. Those rows are only going to get longer and longer too. I did find a few other matching leftovers so I do have some insurance, but knitting this is going to be...interesting. The scale and a spreadsheet will be my constant companions.

*This post contains an affiliate link which means, if you decide to buy through that link, I’ll get a small commission. Thanks!

10th Anniversary Celebration + Sale

This week is the 10th anniversary of With Wool! It’s had a few different names over the years since I cut my teeth blogging on LiveJournal, but With Wool got it’s real start when the Bearded One bought me a domain for my birthday. I had graduated college a few months before, and was using my greater amounts of free time to dive a little deeper into blogging, knitting, pattern design, and fiber arts. My first few years of posts weren’t just about knitting. I tried origami, shared kumihimo tutorials, and wrote about monthly goals for yoga, art, and learning to spin yarn. The bulky blue and yellow yarn below is my very first handspun!

It’s been wonderful looking back at my posts and seeing the projects and yarn I’ve made. I’ve learned so much and made dozens of tutorials. My life has changed so much as well with several cross country moves, marriage, and a now a young kiddo. It’s been a wild and wonderful 10 years.

What’s next?

• For one, the blog will keep going because I like writing it though I will be mixing things up a little. There will still be step-by-step tutorials and other longer posts, but I’m also aiming to post more short WIP updates and other ramblings. I miss writing that sort of thing. And I’m going to try to post more than twice a month which should be easier with shorter posts.

• I’ve mostly given up on the idea of video tutorials because I hate filming and editing videos. There might be the rare tutorial video, but they’re not a top priority.

• I’m going to keep working on knitting patterns even though they’ll take me longer than usual. My main work time is nap time after all.

• I’m also giving myself the permission and leeway to change things up if they aren’t working anymore. No more feeling obligated to do something just because I’ve been doing it for years.

And it’s also my birthday. So to celebrate my joint blogging anniversary and birthday, I’m having a sale. With Wool patterns will be 34% off for the next 2 weeks! Thanks for celebrating with me!

Use code HOORAY here, now through August 21, 2019, to pick up a pattern or two you’ve had your eye on.